Commercial Electrical & Generator Services for Massachusetts & New Hampshire Buildings
R&D Life Safety Systems performs commercial electrical work alongside its fire alarm and life-safety services — standby generator installations, load center and electrical panel replacements, and the electrical scope that supports life-safety systems. For building owners and managers, that means one accountable contractor for the systems that protect the building and the power that keeps them running, with the same documentation discipline on both.
When to call
Sound familiar?
- Your building needs a standby generator — for life-safety loads, elevators, heat, or tenant expectations — and you want one contractor to own the project.
- An aging or recalled load center needs replacement before it becomes the reason for an insurance conversation.
- An electrical panel is out of capacity for a renovation, new equipment, or added circuits.
- Your fire alarm project has electrical scope — dedicated circuits, pathway, power supplies — and coordinating two contractors is costing you time.
- An inspection or insurance visit flagged electrical conditions that need correction with documentation.
- The building lost power and the aftermath exposed what isn’t on backup — and should be.
Scope
What this covers
Included
- Standby generator installation, including transfer switch work and connection of designated loads
- Load center and electrical panel replacements and upgrades
- Dedicated circuits and branch wiring for equipment, systems, and building improvements
- Electrical scope supporting fire alarm and life-safety installations — power supplies, circuits, and pathway
- Correction of flagged electrical deficiencies, with documentation that closes the record
- Coordination of permits and municipal wiring inspections for the work we perform
Not included (and who we coordinate with instead)
- Utility-side and high-voltage service work (we coordinate with the utility and specialty contractors)
- Engineering stamped designs where required — we work with your engineer of record
- Generator sizing studies for complex facilities — performed with the engineer, not guessed at
How it works
What happens when you call
- 1
Talk through the need
Call 617-207-2777 or send a quote request. Tell us what's driving the project — a generator requirement, a failing panel, a renovation — and we'll tell you what a sound path looks like.
- 2
Look at the building
Electrical work priced without seeing the service, the panel schedule, and the site conditions is guesswork. We look first, then quote a scope that holds.
- 3
Permit and schedule
Permits are pulled for the work, and the schedule is built around your occupants and operations — including planned outages announced in advance, never sprung on a building.
- 4
Do the work
Licensed electricians perform the installation to the approved scope, coordinating with other trades where the project involves them.
- 5
Inspect and document
Municipal wiring inspections are coordinated and the closeout includes the documentation your records should hold — what was installed, where, and the approvals behind it.
Where this applies
Facility types we work in
- Office and commercial buildings
- Apartment and condominium buildings
- Municipal and public-housing buildings
- Schools and campus buildings
- Industrial and warehouse facilities
- Retail and mixed-use properties
Systems & platforms
Generator projects are quoted around your building's actual loads and fuel options — natural gas, propane, or diesel — and we'll tell you plainly when a project needs the engineer of record involved before anyone orders equipment.
Why R&D
What working with us is like
One contractor, both disciplines
Fire alarm and electrical scope on the same project usually means two contractors pointing at each other. Here it's one accountable company — the circuits, the panels, and the life-safety systems they feed.
Power for the systems that matter
We think about electrical work from the life-safety side: what must stay powered, what the code expects of it, and what the building can't afford to lose in an outage.
Documentation on the electrical side too
Panel schedules that match reality, permits and inspection records in your file, and closeout paperwork you can hand to an insurer or a buyer without apologizing.
Straight answers on scope
If a panel can stay, we say so. If a generator project needs an engineer before it needs a quote, we say that too — before you spend money in the wrong order.
Questions
Frequently asked questions
Do you install standby generators for commercial buildings?
Yes — standby generator installations including transfer switch work and connection of the loads the building designates. Sizing is done against your actual loads and, where the project warrants it, with your engineer of record. Fuel type — natural gas, propane, or diesel — depends on the site, and we'll walk through the tradeoffs before anything is ordered.
My load center is old — does it actually need replacing?
Sometimes no, and we'll say so. But panels with known defect histories, obsolete breakers, corrosion, or no remaining capacity are genuine liabilities — some are flagged by insurers by brand name. We look at what's installed and give you the honest answer with the reasoning in writing, whichever direction it points.
Are you licensed for electrical work?
License and insurance documentation is available on request — ask us when you call.
Can you handle the electrical scope of a fire alarm project?
Yes — that combination is exactly why we added electrical services. Dedicated circuits, power supplies, and pathway for fire alarm and life-safety systems get done by the same company installing and programming those systems, which removes a whole category of cross-contractor coordination problems.
Will the power be out during the work?
Some electrical work requires planned outages — there's no honest way around that. What's controllable is surprise: outages are scheduled with you in advance, scoped as short as the work allows, and timed around your building's operations.
Coverage
Service area
Electrical and generator work is available across Massachusetts and New Hampshire. Call to confirm coverage for your specific site.
Related pages
Commercial Fire Alarm Systems
Commercial fire alarm installation, testing, service, and monitoring for facilities across MA & NH. Call 617-207-2777 — we answer, or we call you back.
Learn more →Fire Alarm Installation
Commercial fire alarm installation, panel replacement, and tenant fit-out work in MA & NH. Design coordination through AHJ acceptance. Call 617-207-2777.
Learn more →Environmental Monitoring
Water leak detection, low-temperature freeze alarms, and sump, generator & power monitoring for buildings across MA & NH. Call 617-207-2777.
Learn more →Commercial & Industrial
Fire alarm service, testing, and repair for manufacturing, warehouse & industrial facilities in MA & NH — planned around production. Call 617-207-2777.
Learn more →Property Management
Fire alarm inspection, service, and monitoring for property management portfolios across MA & NH. One accountable vendor — call 617-207-2777.
Learn more →Massachusetts
Commercial fire alarm installation, testing, service & monitoring across Massachusetts. Based in Braintree, MA. Call 617-207-2777 — we answer or call back.
Learn more →New Hampshire
Commercial fire alarm installation, inspection, service, and monitoring for New Hampshire buildings, served from our Massachusetts base. Call 617-207-2777.
Learn more →Browse all services or contact us with a question.
Talk through the electrical project
Generator, load center, panel, or the electrical side of a life-safety project — call 617-207-2777 or request a quote and get a straight answer on scope and sequence.